ASTM A252 is the standard specification for welded and seamless steel pipe piles. It covers cylindrical steel pipes with nominal wall thickness, specifically for piling purposes. Rectangular or square pipes are excluded
.
These pipes serve as permanent load-bearing members, or as shells for cast-in-place concrete piles, providing foundation support for construction projects.
Units: Inch-pound (can be converted to SI units).
Provides reference mechanical and chemical data for engineers and designers for structural design.
Phosphorus (P) max: 0.050% (higher P reduces weldability and makes steel brittle).
Other elements follow general carbon steel composition, as the standard focuses mainly on mechanical properties.
Mechanical Properties of ASTM A252 Pipes
| 1 | 205 MPa (30,000 psi) | 345 MPa (50,000 psi) | Wall-dependent |
| 2 | 240 MPa (35,000 psi) | 415 MPa (60,000 psi) | Wall-dependent |
| 3 | 310 MPa (45,000 psi) | 455 MPa (66,000 psi) | Wall-dependent |
Grade 3 is the most widely used, ideal for heavy-duty piling applications.
Elongation decreases with decreasing wall thickness, ensuring adequate ductility under load.
ASTM A370: Mechanical test methods for steel products.
ASTM A751: Chemical analysis methods.
ASTM A941: Steel terminology.
ASTM E29: Significant digits in test results for specification compliance.
Hot rolled or cold drawn, thermally expanded, seamless steel pipes.
Types: ERW (electric resistance welded), flash welded, fusion welded, submerged arc welded (SSAW or LSAW).
Seams can be longitudinal or helical spiral.
Steel produced via open-hearth, basic oxygen, or electric furnace processes.
Pre-Purchase Information
Before ordering ASTM A252 pipe piles, the following info is required:
Material grade (Grade 1, 2, 3)
Pipe dimensions (OD, wall thickness, ASME B36.10 schedule)
Surface imperfections >25% of wall thickness are defects.
Imperfections <=22.5% can be repaired by welding.
Any defects must be removed before butt welding pipe piles.
Heat Analysis: Phosphorus limit; results reported in MTC.
<14" OD: 2 samples per 200 pcs
14–36" OD: 2 samples per 100 pcs
36" OD: 2 per 3,000 ft
Must comply with grade-specific yield and tensile strengths.
Yield strength measured at 0.2% offset if needed; total extension 0.5% gage length.
Weight: +15% / -5% of theoretical.
OD tolerance: ±1%
Wall thickness tolerance: ±12%
Note: Hydrostatic testing is not required, since A252 pipes are for piling, not liquid transport.
ASTM A252 pipe piles provide foundation stability for:
Buildings and high-rise structures
High strength and yield for load-bearing applications
ASTM A252 pipe piles are a key foundation element in modern construction. Grade 3 is the most commonly used due to its high tensile (455 MPa) and yield strength (310 MPa). Proper selection of grade, diameter, wall thickness, and length ensures safe, stable, and durable foundations.


